Community

2017

Don’t forget to follow us on Social Media!

fb tw ig yt

Mastercut was awarded with a certificate of appreciation for contributing to the 2016 Manufacturing Day!
cvx_i0hxgaalvfl


2nd Annual 5k – Run, Walk, Paddle
The 2nd Annual Manufacturing Run Walk Paddle for Education was held on October 22, 2016.
After enjoying a gorgeous sunrise over Tampa Bay, the event began at the marina and traveled south along the picturesque Bayshore Blvd. Enjoying Cooper’s Bayou Park before heading north back to the marina for refreshments and closing ceremonies. Thank you for helping us raise funds for deserving, future engineers! We had such a great time!! Proceeds will be distributed to the following entities for student scholarships: Society of Manufacturing Engineers, Upper Tampa Bay Education Foundation and a new edition this year, Nuts, Bolts & Thingamajigs.

Click here to view race results!

cvx47fiweam8s8vcvx3kpgwyaastzq

img_1714
img_20161026_114235


Our beneficiaries:
Florida Suncoast Manufacturing
SME
Nuts, Bolts & Thingamajigs


Thank you to our sponsors:


Michael Shaluly being interviewed by Traci McMillan from the Business Observer!
Click image for full story!
mike-interview


Mastercut being recognized by the Board of County Commissioners
On August 9th, at the Pinellas County Board of County Commissioner’s meeting, Michael Shaluly, President of Mastercut Tool, was recognized for his contributions to the Pinellas economy and leadership in the business community with the “Thank you for Doing Business in Pinellas,” award presented by Commission Chairman Charlie Justice.
Click the link to read the full article:

PCED award
2015

Mastercut Tool Corp.’s 30th anniversary celebration was held on October 23rd in Safety Harbor, Fl. Over 160 were in attendance, including employees, sales representatives, vendors and community officials.
mike and mia at 30th luncheon


5K Manufacturing Fun Run / Walk on October 24th, 2015
race
Mastercut Tools Fun Run Walk Paddle Event 10-24-15 (2)


The first annual 5K Manufacturing Fun Run / Walk , sponsored by Mastercut Tool Corp. and The Shaluly Foundation was held on October 24, 2015. Proceeds were $22,649.73 and distributed equally between Upper Tampa Bay Education Foundation and the Society of Manufacturing Engineers. Each entity received $11,324.37 for future engineering students’ scholarships.

big check
award

On November 20, 2015 Mastercut Tool Corp. was the stage for a Florida Department of Economic Opportunity press conference. Executive Director, Mr. Jesse Panuccio reported Florida’s 5.1% unemployment, the lowest in 7 years.

Jesse Panuccio
Jesse-Mike-Mastercut

Finalist for Manufacturer of the Year with MAF, the Manufacturers Association of Florida.
PlacqueAward


Winner of the 2015 Upper Tampa Bay Manufacturer of the Year Award!
2015ManufacturerYearAward


March 30th, 2015 in New Port Richey, Florida at AMskills event. (American Manufacturing Skills Initiative). Mastercut is an AMskills Advisory Council Member. Shown here, Mastercut President Michael Shaluly at a town hall meeting, bringing together students, parents, manufacturers, as well as teachers and city and county officials. AMskills is an apprenticeship program patterned after the successful German system in use for decades there.

Mike Presenting 2 -500
Mike Presenting 1 -500

2014

National Manufacturing Day Student Tours 2014

studentsfrancois
studentscarol
studentsbus

Sincere appreciation to our Mastercut volunteers who helped set-up Harbor Sounds, 2014!

isabelle
stacy
phetclaudia

Exciting news: MasterCut Tool named – Safety Harbor Industrial Business of the Year 2014!
Safety Harbor Industrial Business of the Year 2014


Mastercut Tool Corp. Sponsors the Upper Tampa Bay Manufacturers Association
UTBMA Program Cover & Sponsor Listing


Look for us in the Safety Harbor Visitor Guide and Business Directory!
Look for us in the Safety Harbor Visitor Guide and Business Directory


Supporting Our Youth!
Mastercut president, Michael Shaluly, stands second from left at the grand opening of the Chi-Chi Rodriguez youth center. This foundation assists at-risk youth with education and coaching. Chi Chi himself grew up poor in Puerto Rico, making golf clubs out of guava tree branches. He honed his golf game traveling with the Army to become a well-known figure on the PGA Tour. This foundation strives to keep that door of opportunity open for our youth!
Ribbon cutting photo2


2013

We give back!

2011

Mastercut Tool Corp. wins award for beautifying Safety Harbor!

Mayors Plaque